MONITOR CONNECTIONS :
If the system does not function properly, please check the following points.
TROUBLE SHOOTING:
-11-
CAMERA
MONITOR
PROBLEM
REMEDY
Too dark or bright picture
Readjust the CONTRAST or BRIGHTNESS controls
NO POWER
Check AC connection
Poor picture quality
Clean the camera lens. Readjust the CONTRAST or
BRIGHTNESS controls
Picture but no sound
Adjust the VOLUME control
Shrinking picture
Check the condition of the POWER source
1. Camera 1 input
Connect one end of the supplied 65ft cable to
the first wired camera and the other end to the
camera 1 input
2. Camera 2 input
Connect one end of the supplied 65ft cable to
the first wired camera, the other end to camera
2 input
3. Camera 3 input
Connect one end of the supplied 65ft cable to
the second wired camera, the other end to
camera 3 input
4. Camera 4 input
Connect one end of the supplied 65ft cable to
the third wired camera, the other end to
camera 4 input
Make sure the camera is not facing any direct light
or Sunlight
Check the connections from the PIR to the camera
Picture Flickering or Over Exposed
Motion sensor not working
Check the cable for any lose connection
No Picture
REMEDY
PROBLEM
