MONITOR CONTROLS - FRONT PANEL:
-5-
1. Power Switch
- Pressing this switch will turn power ON to the monitor. Pressing it again
will turn the power OFF. The master power switch, which controls the monitor is located at
the back of the unit.
2. Talk Button
- I) Full screen mode - The user can talk to the specific camera location by
pressing and holding this button. The talk button must be pressed the entire time, while
talking. To listen to camera location release the talk button.
II) Quad Mode – In quad mode, the talk feature can only be utilized for
two way audio communication from one camera. The user must therefore select the camera
to which they want to utilize this feature. To utilize the talk feature in Quad mode proceed
as follows:
a) Press the talk button . A ‘T’ will appear on the camera 1 screen
b) Continue pressing the talk button until the letter ‘T’ appears in the desired screen
c) Press the channel button corresponding to where the ‘T’ letter appears. Press and
hold this button. Release the button to listen to the camera.
3 Camera 1,2,3,4 Buttons
- these buttons allow the user to go to full screen display of each
of the four cameras.
4. Auto / Quad (Auto Sequential Display Select Button)
– This button will place the unit into
Quad display or sequential display mode. In sequential display mode, the monitor will
automatically rotate between the different channels
