5. MENU BUTTON
– The monitor has a number of programmable features available by using
the Menu option. To enter the Menu selection, press the MENU button. The main menu as
identified will appear.
MAIN MENU
1.
TITLE SET
2.
SEQUENCE
3.
SCAN DWELL TIME
4.
ALARM RESET TIME
5.
TIME/DATE
6.
EXIT
NOTE: TWO OPTIONS ARE AVAILABLE FOR CHANGING OPTIONS WITHIN THE MAIN
MENUS.
Monitor Panel - Use the (Up/Down) and (left/right) arrow buttons located on the
front of the monitor to move around the screen.
Remote Control - Use the (CA1/CA2) and (CA3/CA4) buttons to move
around the screen
TITLESET
- This button allows the user to title each camera. A total of up to 8 characters
is available. Use the
(up/down) and (left/right) buttons to set the titles. When c
complete, press the MENU button until you exit this menu
SEQUENCE
- This function is used in auto mode. The camera will automatically rotate
Between the four camera locations in AUTO mode. The monitor has been defaulted to a
1-2-3-4-Q (quad) setting. Use the (up/down) and (left/right) buttons to
change the sequence settings. When complete press the menu button.
SCAN DWELL TIME
- This function is used in auto mode. It controls the speed to which the
monitor moves from one camera to another. The setting is defaulted to 1 second but can be
adjusted to 1 - 60 seconds. Use the (up,down)buttons to set the dwell time. When
complete press the menu button
-6-
