Lorex LNR100 SERIES Instruction Manual Download Page 29

Page: 29 / 186

Using the System

8.2

Using the Quick Menu

The Quick menu gives you access to the system’s key functions. To access the Quick
Menu, right-click the screen during live view.

The Quick Menu has the following options:

•

View

: Select a camera in full-screen or select a multi-channel display.

•

Pan/Tilt/Zoom

: Access controls for PTZ cameras (not included).

•

AutoFocus:

Access zoom/focus controls for auto-focus cameras (not included).

•

Color Setting

: Configure color settings for cameras.

•

Search

: Search/playback recorded video. See 11

Search (Playback)

, page 29.

•

Record

: Open the Record menu to select manual recording options. See 10.3

Setting

up Scheduled or Manual Recording

, page 27.

•

Device Search

: Open the Device Search menu to manage IP cameras.

•

Info

: Opens the system information window.

•

Sequence

: Click to start/stop sequence mode. In sequence mode, the system will au-

tomatically cycle through connected cameras every few seconds.

•

Main Menu

: Open the Main Menu. See 14

Using the Main Menu

, page 42.

8.3

Using Sequence Mode

In sequence mode, the system will automatically cycle through connected cameras every
few seconds.

To use sequence mode:

1. Right-click and select

Sequence

to start sequence mode. A

will appear to show

that sequence mode is on.

2. Click the icon to pause sequence mode on the channel that is currently shown (icon

changes to

). Click again to resume sequence mode.

3. Right-click and select

Sequence

to return to normal viewing mode.

8.4

Adjusting Color Settings

Use the Color Settings menu to adjust color settings for your cameras.

To adjust color settings:

1. Right-click on the channel you would like to configure and select

Color Setting

. Enter

the system password if prompted.

#; r. 2.0/23308/23308; en-US

Summary of Contents for LNR100 SERIES



























































































































































































Search results

Summary of Contents for LNR100 SERIES

Reviews:

Lorex LNR100 SERIES, Instruction Manual, Page: 29 / 186

Search results

Summary of Contents for LNR100 SERIES

Reviews: