LNR100 Series Hard Drive Installation
18
7. Replace the cover and cover screws (6x).
NOTE
After installation, you must format the hard drive in order to use it with the system. See 18.3
Format-
ting Hard Drives
, page 147.
18.3
Formatting Hard Drives
You must format hard drives before you may use them with the system.
CAUTION
Formatting the HDD erases all data on the hard disk. This step cannot be undone. System settings will
not be erased.
To format a hard drive:
1. From Live View, right-click and select
Main Menu
.
2. Click
>HDD Management
.
3. Configure the following:
3.1.
Under
HDD No.
, select the hard drive you would like to format. Information
about the hard drive appears in the lower section of the menu.
3.2.
Under
Set to
, select
Format
.
3.3.
Click
Apply
. Click
OK
to confirm. Wait for the hard drive to format. Hard drives
become Read/Write hard drives by default when formatted.
#; r. 2.0/23308/23308; en-US
147
Summary of Contents for LNR100 SERIES
