Lorex LNC234 Series, User Manual, Page: 40 / 146

Connecting to Your Camera on Mac 10
8. Click WiFi Security again and click WiFi Test (this may take up to 60 seconds).
9. When successful, Status will say Test Success . If unsuccessful, double check your
wireless password and make sure your camera is close enough to the wireless router
to get a good signal.
10. Remove the Ethernet cable from the camera, wait 60 seconds, and then reconnect to
your camera in L-View.
#LX400063; r. 1.0/26005/26005; en-US
32