System Menu
29
User Setup (cont.)
•
NETWORK USER LIST
– The Network
List allows for 10 Users to be added to the
system. Each user has variable
permissions to the system.
o
ID
: Enter an ID for the User, using
the Virtual Keyboard.
o
Select the PASSWORD SET
(Figure 1) to set the user
password.
o
Select the ACCESS SET (Figure
2) options to configure the users.
o
Use the NEXT button to switch
between Users 1~5 and 6~10.
•
AUTO LOGOUT TIME – Set the length of time that it will take for the logged in user to expire. Set
to 1 min, 3 min., 5 min., 10 min., 30 min., 60 min. or OFF (A login password is always required).
Disk Management
Recorded data is saved to the installed Hard Drive,
and can be backed up to a USB storage device.
The Disk Management section displays the name
and basic hardware information of each device.
•
RECORD MODE – Sets the system to
either:
o
OVERWRITE old data once the
drive is full
o
STOP recording once the drive is
full.
•
If the Record Mode setting is set to STOP,
additional settings are available:
o
DISK FULL WARNING: Set the percentage of disk space to be used before displaying a
DISK FULL warning (OFF, 80~99%)
o
DISK FULL ACTION: Sets the system to display a Message when the drive is nearing full
capacity.
•
MIRROR – Turns real time data mirroring (backup to a second drive) to ON or OFF.
NOTE: Mirroring means that the system will record video to the local drive and automatically copy it to an
external disk. The capacity of the external drive should be greater than or equal to the size of the internal
hard disk.
