Display Modes
21
The unit will automatically begin loading when power is
connected to the system.
1.
The System will perform a Hard Drive and
Firmware check. During the loading sequence,
the System will perform a Hard Drive and
Firmware Check. During the loading sequence,
the screen will display the message SYSTEM
CHECK.
2.
Once the system checks are completed, the
screen will display the text message
INITIALIZING SYSTEM
before completing the
loading process.
3.
The unit will initially load to a split screen view,
displaying all 8 cameras (if available) and a
system legend in a 3x3 Screen View.
NOTE
: Pressing the POWER button located on the
front panel of the Observation System turns the Monitor
ON/OFF only, and does not affect the actual power
state of the System.
Display Modes
Initial Loading Sequence
NOTE
: If a new
HARD DRIVE
is detected, the system will
prompt you to
FORMAT
the drive. If you do not choose to
format the
HARD DRIVE
, the drive will not be detected by
the system.
If you choose to
FORMAT
a drive in this way, the drive will
no longer be readable by a regular PC without using the
HARD DRIVE VIEWER software included on the CD
provided with this unit
Press
ENTER
to choose the
OK
option and proceed with
the format.
NEW HDD FOUND IN
INTERNAL. YOU MUST
FORMAT IT TO RECORD.
WARNING
O K
1
2
3
