LLR03187
Installation Instructions
2
DISCLAIMER
Lorell and its affiliated corporations and subsidiaries
(collectively “Lorell”), intend to make this manual accurate and
complete. However, Lorell makes no claim that the information
contained herein covers all details, conditions or variations, nor
does it provide for every possible contingency in connection
with the installation or use of this product. The information
contained in this document is subject to change without notice
or obligation of any kind. Lorell makes no representation of
warranty, expressed or implied, regarding the information
contained herein. Lorell assumes no responsibility for accuracy,
completeness or sufficiency of the information contained in this
document.
DEFINITIONS
MOUNTING SYSTEM:
A MOUNTING SYSTEM is the
primary Lorell product to which an accessory and/or component
is attached.
ACCESSORY:
AN ACCESSORY is the secondary Lorell
product which is attached to a primary Lorell product, and may
have a component attached or setting on it.
COMPONENT:
A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING:
A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS!
WARNING:
Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING:
Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING:
Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING:
Do not use this product outdoors.
WARNING:
Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the LLR03187 Monitor Arm and
the desk up to (and including) the display does not exceed
the weight limits listed in the table below. Use with products
heavier than the maximum weight indicated may result in
collapse of the mount and its accessories causing possible
injury.
--SAVE THESE INSTRUCTIONS!--
MODEL
Max Weight
Allowed for EACH
Display
Max Weight
Capacity of Mount
LLR03187
25 lbs
(11.3 kg)
50 lbs
(22.7 kg)
