Installation Instructions
LLR03187
11
Cable Management
1.
Press insides of cable management covers at both ends to
unhinge tabs on either end of cable management cover on
upper arm. (See Figure )
2.
Lift cable management cover up until tabs are unhinged and
cover is in the “open” position. (See Figure )
Figure 19
Figure 20
3.
Route cables through cable management channel on upper
arm. (See Figure 20)
IMPORTANT ! :
Be sure to leave enough slack in the
cables near display and arm joint to allow for full arm
articulation!
4.
Close cable management covers on monitor arm. (See
Figure 20)
5.
Route cables through cable clips on lower arm(s). (See
Figure 20)
6.
(OPTIONAL)
Route through cable clip on column. (See
Figure 21)
Figure 21
cable management cover tabs
1
2
5
4
3
3
cable (typical)
2
5
6
cable clip
