background image

16

8. Service and Maintenance

8.2 The machine does not work perfectly

– the battery is discharged (yellow charge indicator (LED) [5] lights up perma-

nently, the pump automatically cuts off) => charge the battery

– the fluid tank or the fluid tubing is empty or the connecting spout of the fluid

tubing is not correctly plugged into the quick connector on the fluid tank
=> refill the fluid tank, check to see that the tubing plug is properly fitted to
the quick connector

– the vaporizer is clogged or broken => change the vaporizer (see point 8.1)

8.2.1 There will be no fog, if…

8.2.2 Status and error display

The yellow LED [5]…

– flashes once

Battery status display: if the LED flashes slowly, the battery is well charged, if
the LED flashes quickly the battery has to be recharged.

– flashes twice in a row

Vaporizer is broken: change the vaporizer as described in point 8.1.

Important

: The new vaporizer must be calibrated!

– flashes three or four times in a row

Pump error: Please call your local dealer.

– flashes five times in a row

Vaporizer cannot be calibrated: Try once again to calibrate the vaporizer as
explained in point 8.1. If this should not help, the vaporizer is broken and
cannot be used.

– lights permanently

The battery is completely discharged: Disconnect the 

Tiny F07

 from the battery-

pack and recharge the battery.

Summary of Contents for Tiny F07





















Reviews: