Longshine LCS-SW2402S, User Manual

Page: 25 / 264

E-24
5.2 In-Band Connections (Web Browser / Telnet)
To manage the switch through in-band access, you should configure the
management station with an IP address and subnet mask compatible with
your clustering switch.
Factory Default value:
IP
Κ
10.0.0.1
Subnet Mask
Κ
255.0.0.0
Default Gateway
Κ
10.0.0.254
Both standalone switch and the cluster can be managed using either a
standard Web Browser or a Telnet session from any computer attached to
the network. The SNMP management feature also permits the switch to be
managed from any SNMP network management station running a
network management program.
To manage the Standalone switch
Κ
Access the switch with its IP address “10.0.0.1” (factory default value)
To manage any of the Clustering switch
Κ
Access the switch with the IP address of Master device in the
management stack. Then select the switch you want to manage in the
first page
Starting a Telnet Session
To access the switch through a Telnet session
Κ
1. Sure of the switch is configured with an IP address and the switch is
reachable from a PC
2. Start the Telnet program on a PC and connect to the switch
Note
Κ
The management functions of Telnet program are exactly the same with
web-based management interface but in text mode. For further operation, please
refer to
’Starting a Web Browser Session’ .