Longshine LCS-SW2402S, User Manual

Page: 14 / 264

If the port is connected but the SPD/LINK/ACT LED is dark, check the
following items:
1. The switch and the connected device’s power are on or not.
2. The connecting cable is good and with correct type
3. The cable is firmly seated in its connectors in the switch and in the
associated device
4. The connecting device, including any network adapter is well installed
and functioning
FULL/COL LED
A collision occurs when two stations within a collision domain attempt to
transmit data at the same time. Intermittent flashing amber of the collision
LED is normal; the contending adapters resolve each collision by means of a
wait-then-retransmit algorithm. Frequency of collisions is an indicator of
heavy traffic on the network.
If the FULL/COL LED lights amber, means the port is under Full-Duplex
operation or dark for Half-Duplex mode.
FULL/COL LED Status
Steady Amber Full-Duplex mode
Dark Half-Duplex mode
Flashing Amber Collision
Attention
Κ
The 10/100Mbps fiber optical SC slot shares with copper
port-1 in the same LED indicators
E-13