Longshine LCS-SW2402S, User Manual

Page: 24 / 264

5. Management Guide
This section instructs you how to enter and proceed the advanced management
capability, which can be accessed by RS-232 serial port (out-of-band) on the rear panel
or by Telnet session / Internet Browser over the network (in-band).
The management functions such as
Κ
·
Port Information/configuration/Statistic/Location Search/Duplex mode/Flow
Control
·
SNMP parameters
·
802.1Q/Port Group VLAN
·
Upgrade system firmware
·
Reboot system
5.1 Console Port (Out-of-band) connection
After attaching a RS-232 cable (Straight-through) to the serial port of a PC
running a terminal emulation program, press
“Enter” key then login
screen appears. Enter your username and password to login the
management console.
Note
Κ
The management functions of console program are exactly the same with
web-based management interface but in text mode. For further operation, please
refer to
’Starting a Web Browser Session’ .
Attention
Κ
1. The factory default value of UserName and Password is
“admin”
2. For detail console port configurations, please refer to
“Console Port” in chapter 3
3. System configurations via the Console Port only will be
allowed by the way of master device
E-23