802.11g WLAN/Bluetooth Combo USB Dongle User Manual
16
4.3 More Setting …
Click “ More Setting “ icon of Figure 4-1 to enter “More setting “ window. The
window is shown as “ Figure 4-2 ”.
4.3.1 “General Connection Setting” group:
- Read the current status from the group if the “
Chang
e” button is not
pressed.
- Press “Change” button for modifying the status, when the modification is
finished, press “Apply” to save it. The button “
Change
” and “
Apply
” is
alternately shown on the same position.
SSID
:
The
SSID
(Service Set Identifier), also known as the Network Name, must be
unique to distinguish itself as a particular wireless network. All wireless points
in the network area share the same SSID. Type your network SSID in the
SSID field to associate with access points or stations within the specified
wireless LAN.
Channel
:
This is the radio channel used by wireless devices within the network for
communication. This command is only available while you are operating in
the Ad hoc mode. Specify the operating radio frequency channel from the
pull-down menu if you are the creator of the wireless network. If you are
joining an existing network you do not need to select the channel; configure
the SSID and click
Apply
changes.
Note: The available channels differ from country to country. The chan-nel number must be the same
between the entries/stations within the network, so that each station can communicate with the
other stations
TX Rate
:
Select the transmission rate by “ Tx Rate” drop down menu.
Network Type
:
Select the “Ad_Hoc” or “Infrastructure” Mode by the “Network Type” drop
down menu.
Encryption
:
Select the “
Enable WEP
” or “
Disable WEP
” by the “Encryption” drop
down menu.
Authentication Mode
:
Select the “
Open System
” , “
Shared Key
” mode or “
Auto
” from the
“Authentication Mode” drop down menu.