Checking the spark plug
NOTES ON MAINTENANCE
- Remove four nuts (1) with washers from t-
he storage.
- Take off the storage (2) with the seat.
- Pull the spark plug connector (3).
- Unscrew the spark plug with the spark wr-
ench from the on-bord toolkit.
- Check the electrode gap (0.6-0.7mm) rep-
lace the spark plug if it is severely burnt a-
way.
- Use a new spark plug
and
tighten up.
NGK CR7HSA
CAUTION
Check or change the spark plug only wh-
en the engine is cold.
Check and change
- Screw in the spark plug by hand and then
tighten up with the spark wrench.
- Plug in the spark plug connector (3).
Torque 11 Nm.
0.6-0.7mm
2
3
33
1
1
