Running-in instructions for engine and
transmission.
Running-in
- During the first 500 km:
- Up to 1.000 km:
Less than 1/2 throttle.
Less than 3/4 throttle.
NOTE
During the running-in period, ride in freque-
ntly changing load and rpm ranges. Select
winding and slightly hilly routes. Avoid con-
stantly low rpm counts and full throttle und-
er load.
WARNING
New brake linings must be run-in and w-
ill not have their full friction power until
after 500 km.
The slightly reduced braking effect can
be compensated for by an increase in
the pressure on the brake lever.
During this period, avoid unnecessary
hard braking actions.
Running-in new tyres
CAUTION
New tyres have a smooth surface. They
must therefore be roughened by careful-
ly running them in at various slanted po-
sitions.
Only then will the surface obtain its full
grip!
Running-in new brake linings
RIDING INSTRUCTIONS
CAUTION
Excessive revs while running-in the eng-
ine increases the wear of the engine.
Engine faults during the running-in peri-
od must be immediately reported to a s-
pecialized dealer.
CAUTION
The first inspection must be carried out
immediately after the first 1.000 km.
You can save yourself delays by making an
appointment with a specialized dealer in ad-
vance.
15
