WARRANTY
List of wear parts
Cleaning / inspection during every maintenance.
must be replaced during each maintenance interval to ensure proper function.
Wear limits
depending on riding style, load and tire pressure the wear limit may already be
reached after only 500 km or even earlier.
depending on riding style, load and tire pressure the wear limit may already be
reached after only 1500 km or even earlier. Check during each maintenance.
Oxidation is a lack of maintenance!
during the first inspection, then with every maintenance interval(every 3000 km/6000 km).
Check oil level before every ride.
depending on road conditions / unevenness of the road surface the lifetime will be
reduced, this may already occur after 500 km.
depending on riding style and load these may already be worn after 1500 km,
in cross-country operation even earlier.
depending on road conditions and care wear may start after 500 km.
Dirt reduces the lifetime. Do not clean with a high pressure cleaner!
depending on road conditions and care wear may start after 1500 km.
Soiling of the wheel hub reduces the lifetime.
Check during each maintenance interval, do not clean with a high pressure cleaner!
depending on load and care after 1500 km, check with every maintenance.
depending on care starting after 500 km. Check with every maintenance.
Plastic parts will be damaged by caustic or penetrating cleaning agents or solvents.
Tires, houses, rims
Wheels, hubs
Spring fork, spring strut
Sedal rings, sealants, O-rings
Wear parts
Oils, air filter, leakage inspection on
engine
Lamps, incandescent bulbs, electric
system
Barke linings, brake shoes, brake lines
Radial seals on engine, gearbox, fork and
wheels
Wheel bearings, steering bearings
Swing arm bearing
Cables
Coverings
48