1
Operation Panel
2
Star t/Stop Key
Exit Key
Direction Key
Prime Key
Knob
S 1
S 2
P 3
P 2
P 4
P 1
LCD Display
Power Switch
Introduction
Applicable pump heads for BT100-1F are YZ1515x, YZ2515x, YZII15, YZII25 and
DG-1, DG-2, DG-4. The pump delivers flow rates from 0.16
L to 500 mL / min
and dispensing volume is from 0.01 mL to 9.99 L. Combining 128
32 LCD
display with membrane keypad and rotary coded switch makes the operation
easy and prompt. The speed can be adjusted manually or automatically through
external control interface.
μ
×
Note:
Ref. page 11 to know detailed external control function.
The pump must be grounded properly before operating in order to protect the
operator in moist environment.
S
Standard Configuration
S1 Pump Head
S2 Drive
P
Par t
P1
Signal Output Por t
P2
External Control Input Por t
P3
Power Socket
P4
Infuse Holder
Basic Operation
Start/Stop Key
Direction Key
Knob
Knob
Knob
Knob
Prime Key
Prime Key
Prime Key
Exit Key
Exit Key
Power Switch
Press to star t or stop the pump
Press to change the rotation direction of the pump
Function 1: Turn the
to adjust flow rate under none-prime working status.
Function 2: Menu selection function, turn the
to select menu and set the
parameters, press
to confirm the selection.
In common state, press the
to enter prime state when the pump runs
at full speed for empting, filling and rinsing operation; Press the
again to return to common state. In prime state, other keys are invalid.
Function 1: Cancel current operation and return to previous menu.
Function 2: In dispensing working mode, press
to check current speed
and the needed time for dispensing the set volume.
Turn on or off the pump.
BT100-1F OPERATING MANUAL
BT100-1F OPERATING MANUAL