22
www.longer3d.com [email protected]
click Edit icon, then click clone icon.
6.10 Slice
Thickness
: the current layer thickness of printing model.
Thickness Setting
: set the layer thickness, the suggested value
is between 20 to 50μm.
Advanced Setting
: set the layer number of base plate to strong
the adhension between model and building platform, the
height of base is about
0.3mm
, so the layer number is set to
6
when the layer thickness is 50μm
.
Start
: slice the model with the setting layer thickness, “
Sliced
”
will show behind the Thickness incon when slice is completed,
otherwise shown “not slice”.
Slicing Image Preview
: preview the image of sliced model.
Click
slice
icon, adjust the layer thickness to suitable value by
①
②
③
④
