7
www.longer3d.com [email protected]
Up: move up the Z aix by the selected distance (
the selected
distance is surrouned by red frame
).
Down: move down the Z aix by the selected distance.
Home: move the Z aix to home position which is the position
to print the first layer (
A tip dialog will show up to confirm the
operation
that is “Make sure that there is no model below the
build plate OR in the resin tank”).
Disabled: make the stepper motor unlocked, so user can move
the Z aix by manually.
Back: back to previous menu.
2) Check
Turn on
: lighten the LED and show up a picture to confirm that
the LCD and LED are ok (A tip dialog will up to confirm the
operation that is “
Make sure that there is no model below the
build plate OR in the resin tank
”).
Turn off
: turn off the LED.
