21
www.longer3d.com [email protected]
Density
: the density of generating support, the bigger value,
more support will be generated. The suggested value is
between about
0.8
.
Attaching Point
: the diameter of supports that contact model,
the bigger diameter, the stronger support, but harder to spin
off. The suggested value is about
0.6
.
Shaft Diameter
: the diameter of support column, the larger
value, the stronger support, but more difficult to remove. The
suggested value is about
0.8
.
Lift Distance
: the distance between the model and building
platform is lifted by generating support. The suggested value
is between
0 to 3mm
.
Default
: recover support parameters to orginal values.
Make a copy of suppoted mdel
: select the model with support,
support position
