LongCo: User Manual V08 / 03. Mai 2019
Seite 33 von 56
3.4. RFID-Key-Set
3.5. Turn On/Off
The RFID-Key-Set (picture 1) has 3 keys:
1)
blue RFID Chip
: turn the LongCo on and off, usage with settings of Setup A
2)
black RFID Chip:
turn the LongCo on and off, usage with settings of Setup B
3)
red RFID Chip (ADMIN)
:
allows access to setup-mode of TFT-Display to change settings for
Setup A and B
Please note: Lost chip-keys can only be replaced by the manufacturer. Customers receive
2 sets, please secure the second set.
Hold the RFID-Key in Front Lower left Corner of the TFT-Display to turn on the LongCo (picture 2).
This works only if the batteries are turned on and at least one battery shows “ON”. For your
reference, the batteries turn of after 1min, if the TFT is not turned on.
After the Display is activated it shows the general information. Now release the parking brake
and you are ready to go by turn the throttle.
Hold again the RFID-Key same position on the TFT-Display to turn off the LongCo. Please make
sure the speed is zero.
The batteries turn off automatically after 1min.