LongCo: User Manual V08 / 03. Mai 2019
Seite 10 von 56
1.5. Pre-Ride Inspection
•
Check the functionality of the LongCo prior to each use.
•
Make sure all fastening elements are tight (bolts, quick release clamps, folding mechanism
for stem and platform, etc.).
•
Do not use the LongCo if any parts are loose or damaged
•
Ensure that brakes work properly
•
All batteries must be firmly locked onto frame and both keys must be taken off the battery
before riding the LongCo.
•
Ensure that the air pressure of the tires (see
Error! Reference source not found.
) and of the air s
uspension system is correct and adjusted to the rider weight. (see
Error! Reference source
not found.
)
1.6. How to Ride
1.6.1 Turn on
1.6.2 Practice
1.
Turn on the battery by push the right button next to OLED Display (if equipped with 2 or 3
batteries, the other batteries will turn on automatically after activating one). For use only one
battery, the other batteries can be turned off then by push the right button for 2s.
2.
Activate the TFT-Display with the blue RFID-Key (Setup A) or the black RFID-Key (Setup B)
For this hold RFID-Key on Top of the Display left lower corner over the RFID Symbol.
(All details how to use can be found in chapter 3)
•
Beginners must practice using the LongCo first. Training rides should be performed in a safe
place on an even and non-slippery surface, away from traffic or pedestrians.
•
Always be alert and ready to use the brakes.
