28
Set1
Set2
Output
Alarms
Digit
OK
Max/Min
Reset
Bootup routine choices
When you switch on your meter, it can be set to power up with 3 possible summary mes-
sage combinations.
The choices are:-
boot 0
=
Segment test, followed by a full summary of software revision,
calibration audit number, model number, installed options.
boot 1
=
Segment test followed by model number
(Default)
boot 2
=
No summary, meter displays the measurement value
immmediately power is applied.
boot 3
=
Segment test remains permanently avive, until any button is
pressed.
Lockout Switch must be OFF
Press together, briefly
Set1
Set2
Output
Alarms
Digit
OK
Max/Min
Reset
Press OK button briefly and
repeatedly until you see
boot 0
or
boot 1
or
boot 2
or
boot 3
displayed.
Set1
Set2
Output
Alarms
Digit
OK
Max/Min
Reset
Press briefly to toggle
1
2
3
4
Set1
Set2
Output
Alarms
Digit
OK
Max/Min
Reset
Done!
Press DOWN or UP button briefly
and repeatedly to choose from
boot 0
or ,
boot 1
or
boot 2
or
boot 3
!! This feature is available in Advanced Mode only !!
!!
You can trigger the full summary message whenever you want, without
having to power the meter off, by pressing and holding the 2 outer
buttons (Set1 + Alarms) for more than 3 seconds.
Press to accept
OFF
Circuit board ON
