11
Brightness Adjustment
In normal operation, you can select from one of 8 brightness levels, to suit your local lighting
conditions, or to match the brightness of several meters which may be from different batches
or ages.
Press for 3 seconds, then press the down or up button to decrease or increase the
brightness.
Press OK when set.
Your chosen brightness level will be saved in memory, so that the meter will return to the
chosen brightness after power-off.
Lockout notes:
Cal Lock switch = ON when changing.
Drift cancellation (Not on INT2-C, INT2-S)
If your meter will normally be showing 0, for example a platform scale, you can set the meter
to continually cancel any long term drift. To do this, set Drf. 1. to remove this feature, select
Drf.0
This only operates at and around zero reading.
The meter will compares readings to previous ones every 30 seconds, and if the value has
changed by a small amount, the meter will aoutomatically re-zero. The maximum movement in
a 30 second period is 8 counts of the least-significant digit. Any more than that, we assume
the change has been a valid process movement, so leave the change unaltered.
drf.0
bril
drf.0
Summary of Contents for Fusion Series
Page 2: ...2 ...
