London Electronics Fusion Series, Connection Details, Scaling And General Information

Page: 6 / 44

6
General Description
The FUSION Series of displays accept industrial sensors to allow various
physical measurements to be made, such a weight, temperature, pressure,
humidity etc. Different models are available for different sensor types.
The main function of the FUSION series is to give a large numeric readout of
the variable being monitored. You can choose from various digit sizes and
formats. Most models include an excitation power output, to power the sensor
directly.
Optional output modules are also available, to give alarm relay outputs, analogue
output or digital communications, or any combination of these options.
Displays are programmed using front panel pushbuttons. The buttons may be
locked with a switch. The buttons may also be wired remotely, so that you can
make your settings from ground level.
These displays have two power supply options : 100-240 VAC or 11-30VDC
These units must be installed fully assembled, and must be installed according
to local electrical installation rules. When properly installed, with glands on the
lower surface, they provide ingress protection to IP65 / NMA4X
Safety
Obey all safety warnings in this manual, and install the display according to
local wiring and installation regulations. Failure to follow these guidelines may
cause damage to the display, connected equipment, or may be harmful to
personnel.
Any moving mechanical device controlled by this equipment must have suitable
access guards to prevent injury to personnel if the meter should fail.
!
Caution: There is a risk of electrical
shock if this instrument is not properly installed
Caution: Risk of danger: Read the whole
manual before you install this meter