LONCIN LX500ATV Page 38 Owner'S Manual Download | Manualshive

Page: 38 / 156

background image

CONTROL FUNCTION

4 14

-

Using the parking brake when you have to start the
engine or park the machine, especially on a slope.
Apple the

and push down the lock

plate to apply the parking brake.
Squeeze the

brake lever to release the parking

brake.
Using the parking brake in freezing weather may cause
the brakes to freeze in the locked position.

parking brake lever

parking

POTENTIAL HAZARD

WHAT CAN HAPPEN

HOW TO AVOID THE HAZARD

Improper use of the parking brake.

The ATV could start moving unexpectedly if the parking
brake is not applied before starting the engine. This
could cause loss of control or a collision.
The brake could overheat if you ride the ATV without
releasing the parking brake. You could lose braking
performance which could cause an accident. You could
also wear out the brakes prematurely.

Always set the parking brake before starting the
engine.
Always be sure you have released the parking brake
before you begin to ride.

Drive select lever

1. Drive select lever

«
...
36
37
38
39
40
...
»

Summary of Contents for LX500ATV





























































































































































Reviews:

No comments

Related manuals for LX500ATV

Brand: Bad Boy Pages: 56

Brand: Honda Pages: 29

Brand: MANCO Pages: 16

Brand: Suzuki Pages: 382

Brand: Suzuki Pages: 139

Brand: Blata Pages: 24

Falcon Go-kart 2018

Brand: J&J Amusements Pages: 58

Brand: Egholm Pages: 12

Brand: X-TREME Pages: 25

Brand: TOMCAR Pages: 22

Brand: jcb Pages: 227

Venture Lite PZ50RTB

Brand: Yamaha Pages: 100

Brand: Taylor-Dunn Pages: 130

Brand: Honda Pages: 5

Brand: Baja motorsports Pages: 7

Brand: Yamaha Pages: 63

Grizzly 450 2010

Brand: Yamaha Pages: 166

Challenger 300EX

Brand: TrailMaster Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands