PRE-OPERATION CHECKS
8 7
-
ENGINE OIL
Engine Oil Level Measurement
1
To remove Panel F pull outward on the area as
shown
.
,
.
2. Place the machine on a level place.
3. Warm up the engine for several minutes and stop it.
Wait at least ten minutes for the oil to drain back into the
crankcase before checking the oil level.
4.
Remove the engine oil filler cap and wipe
off the dipstick with a clean rag.
5.
Remove the engine oil filler cap and wipe off the
dipstick with a clean rag.he oil level.
6. Insert the dipstick in the oil filler hole
(without
screwing it in), and then remove it again to check the oil
level.
( )
1 Panel F
The engine oil level should be checked before each
ride. In addition, the oil must be changed and the oil
filter cartridge replaced at the intervals specified in the
periodic maintenance and lubrication chart.
( )
1 Engine oil filter cap
( )
2 Dipstic k
( )
1 Maximum oil lever
( )
2 Minimum oil lever
Summary of Contents for LX500ATV
