Operation and Maintenance Instruction LNK-OM-LB-02B/V3.4
2
SECTION
Ⅰ
P
URPOSE
The operation and maintenance instruction is used to guide users how to operate and maintain
LNK-LB-02B lifebuoy light properly.
SECTION
Ⅱ
D
ESCRIPTION
2.1 Introduction
LNK-LB-02B lifebuoy light is replaceable alkaline batteries designed man overboard emergency
light. It should be installed by the side of lifebuoy and attached to the lifebuoy. When the lifebuoy
is throwing into water, the attached light will go with it. Once the light is into water, it will float on
the water and the LED lamp end automatic upwards. Then the light will be activated automatic-
ally and keep outputting the flashing white light more than 2.0cd light intensity during at least 24
hours (10hrs at -1
℃
), which can uninterruptedly indicate the position of lifebuoy to increase the
success rate of rescue.
The light was designed with gravity sensor activation system. It would automatically turn-off
once the head of LED lamp is downwards.
2.2 Product Structure
2.2.1 LNK-LB-02B lifebuoy light consists of Battery case\2* Alkaline batteries \Head of light
with LED lamp \ and clip & rope for installation. The structure is shown as below
Figure2-1:
Figure 2-1 Product Structure
2.3 Technical Parameter
Clip
Head of light
Battery Case
LED Lamp
Installation Rope
