Operation and Maintenance Instruction LNK-OM-LB-02B/V3.4
4
machine or label.
2.4.1.2 Marking content contains:
①
Basic information : Product name, Manufacturer`s company website, Product Code
number, Fulfilled SOLAS standards, Manufacturer, safety CAUTION
②
Manufacturing Batch Number ( see 2.4.2);
③
Expire Date (see 2.4.2);
④
Wheel Mark , Notified body number 0474 , and "YYYY" at figure 2-2
④
represents
mark affixed year.
⑤
Power switch direction indicating.
2.4.2 MFG batch number and EXP. Date show the latest status of light and manufacturing
batch.
They will be shown as MM/YYYY, "MM" at figure 2-2
②
and
③
represents the month of
manufacturing /expired date , "YYYY" at figure 2-2
②
and
③
represents the year of
manufacturing/expired date.
SECTION
Ⅲ
I
NSTALLATION
&
A
SSEMBLE
I
NSTRUCTIONS
3.1 Installation Limitation
LNK-L B-02B lifebuoy light fits for all types of lifebuoys.
3.2 Installation Requirement
LNK-LB-02B lifebuoy light was supplied with installation clip and rope. The clip is normally
installed by the side of lifebuoy, and the lifebuoy light placed on the clip meanwhile it must tied
together with the lifebuoy firmly with the rope. The typical installation is shown as below
Figure3-2. Users must ensure that the light can be pulled out from the clip and go with the
lifebuoy it attached with when the lifebuoy is thrown into water:
3.2.1
Twist the light and turn the POWER to “AUTO” status as
Figure2-2
⑤
shows.
3.2.2 Each lifebuoy light is packed with clip and rope well. When the user is ready to install light,
the clip should be separated from light as Figure 3-1.
3.2.3 The first step of installation is to fix the clip to the suitable position by screws. The second
step is to insert light head to clip and ensure the light locked in clip as Figure 3-1 shows.
3.2.4 When the light is installed well, user should bind the rope of light firmly with lifebuoy as
Figure3-2 shows. When the lifebuoy is thrown into water, the light should be pulled out
and thrown with the lifebuoy it attached with.
3.2.5 User should install the light as above steps every time in order to ensure the light in good
condition.
