4
A.
Use T-30 Torx socket to remove first,
second and fourth bolts on both sides of
truck bed and outer (2) bolts on bulkhead.
NOTE:
These bolts will be replaced with new
hardware in Step 1B. Installers should return
these bolts to the owner.
1: SIDE RAILS AND HEADER BAR INSTALL
50mm bolt
60mm bolt
B.
Place lock washer and flat washer on bolts. Insert 50mm bolts into small clamps and
60mm bolts into large clamps, slide spacers onto long leg of large clamps.
50mm bolt with
small clamp for
bulkhead
60mm bolt with
large clamp for
side rails
Long leg with
spacer
Remove bolts
