2
PREPARATION
NOTE:
For additional protection against the elements, locate and seal miscellaneous
factory holes, crevices, stake pockets, etc. that may be in box (sealant not included).
!
CAUTION: Over torquing hardware may damage components.
!
CAUTION:
Before using, read and understand all directions, warnings and
precautions. For more information, visit primer manufacturer’s website.
!
DANGER:
Highly flammable liquid and vapor. Do not use or store primer near fire
or flame. Use in well ventilated area. No smoking. Avoid contact with eyes. Do not
breathe vapor. Keep out of reach of children. Wear protective gloves and eye/face
protection. May be fatal if swallowed and enters airways. May cause an allergic skin
reaction. May cause drowsiness or dizziness.
NOTE
: For best adhesion, ensure air and surface temperatures are above 60°
F.
TOOLS NEEDED
• Ratchet with 10mm and T-30 Torx sockets
• 10mm wrench
• In-lbs torque wrench
• Cutting tool
• Protective eyewear
• Marking tool
• Gloves
• 7/16” Wrench (optional)
IMPORTANT: Truck is equipped with a trunk-like lid on box floor. Lid remains
functional, however, restricted from fully opening. Avoid forcing lid beyond its limit.
COMPONENTS
• (8) Clamps
• (2) Anchors
• Driver side rail
• Passenger side rail
• Pre-folded cover assembly
• Seal gasket
• Side seal
• Header bar
• Alcohol pad
• Primer
