Lojer SALLI F1, Operating Instructions Manual, Page: 8 / 37

Operation instructions for Salli F1, F2, F3, H2 and H4 Hospital bed / Version 1.3
Copyright © Lojer Oy, 2015 5
5 Use of the hospital bed and accessories
The hospital bed is intended to be used in normal, dry interior conditions. The
room temperature may vary between +10 and +40 °C and the moisture
between 30-75 %. The permissible storage temperature of the bed is between
-5 and +60 °C and the moisture of the storage space between 30 and 75 %.
This paragraph contains information about the installation and use of the
accessories of the hospital bed. Some of the accessories can be purchased
separately.
IMPORTANT! Always use accessories approved by the manufacturer!
5.1 Locking of the castors
If Salli hospital bed is equipped with castors, it can have either central locking
or individual locking castors.
With central locking castors, lock the castors by pressing the pedal at the foot
end of the hospital bed to the lowest position. In the middle position (pedal in
the horizontal position) castors can turn freely.
In the uppermost position pedal direction locks the castor to ease transport.
Lock and check the direction locking wheel by moving the headend of the
hospital bed sideways.
Figure 3. Locking of the central locking castors
1 Castors locked (brake, red button down)
2 Castors turn freely (pedal in middle position)
3 Direction lock (green button down)