Lojer SALLI F1, Operating Instructions Manual, Page: 20 / 37

Operation instructions for Salli F1, F2, F3, H2 and H4 Hospital bed / Version 1.3
Copyright © Lojer Oy, 2015 17
5.12 Short frame assembly to ease transport
Salli GPM models have ability shorten the overall length of bed by removing
foot and head end part. Before shortening of bed remove side rails and other
accessories according instructions. Foot end part is taken out same way in all
models by opening hand wheel screws located in both side of frame and
removing bed end part.
Figure 16. Remove of end part and bed shorten to transport length
To remove head part, lift backrest up and remove head part by pulling out
from both locking knobs at the same time. Lift and pull head part apart from
upper frame. Installing is done in opposite way, push head part into matching
holes in upper frame and slide it downward until locking knobs will lock head
part in place. Secure that head part is completely locked and both locking
knobs are into locked position (pushed in).
Figure 17. How to remove head part