Lojer SALLI F1, Operating Instructions Manual, Page: 11 / 37

Operation instructions for Salli F1, F2, F3, H2 and H4 Hospital bed / Version 1.3
Copyright © Lojer Oy, 2015 8
5.3 Adjustment of the backrest
The backrest of the hospital bed can be regulated between 0-70°. Adjustment
is mechanical or gas spring assisted. With mechanical adjustment the back
rest can be lifted and lowered manually by hand moving the back rest
platform. With gas spring assisted adjustment the backrest can be regulated
by pressing the handle and adjust the backrest in desired position.
Figure 6. Potential hazard areas for hand/finger entrapment when
adjusting mattress platform, backrest, knee, foot section.
IMPORTANT! Always ensure that there is nobody or anything under the
bed or between parts of the mattress platform while the bed
mechanics is raised or lowered (danger of entrapment).
IMPORTANT! Always be careful when adjusting lying surface parts. Risk of
entrapment between mattress surface parts and side rail.
See figure 6.
5.4 Adjustment of the upper and lower leg section
Salli F3 and H4 hospital beds have either a mechanical or gas spring assisted
adjustment for the upper and lower leg section. Adjust the upper leg section in
the desired angle by lifting up from knee area (upper leg part) or in gas spring
assisted version by lifting the handle and raising by hand from knee area if
needed. Lowering is done manually (mechanical bed) or in the gas spring
assisted version by releasing the handle and at the same time pressing the
knee part downwards. Lower leg section can be adjusted desired angle
manually.
IMPORTANT! Always ensure that there is nobody or anything under the
bed or between parts of the mattress platform while the bed
mechanics is raised or lowered (danger of entrapment).
IMPORTANT! Always be careful when adjusting lying surface parts. Risk of
entrapment between mattress surface parts and side rail.
See figure 6.