8
Copyright © Lojer Oy, 2013
02/2013 Rev. 1.0
Figure 6: Middle section adjustment a) 1MDx-models b) 2MD602-models
Figure 7: Adjusting the head section
3.4
Adjusting the middle section (drainage)
There is either a mechanical (Figure 6a) (1) or electrical (Figure 6b) (2) adjustment of the middle section depending on the
model.
Do not adjust the middle section while the patient is on the table.
a)
b)
SQUEEZING HAZARD! Make sure that nothing is between the structure or under the device during
lifting/lowering.
3.5
Adjusting the foot section
Make sure that the middle section is locked before adjusting the foot section. Lift the foot section to desired position. It will lock
to its place automatically. Before lowering free the locking and push the section down.
SQUEEZING HAZARD! Make sure that nothing is between the structure or under the device during
lifting/lowering.
3.6
Adjusting the head section
Lift the adjustment lever (1) (Figure 7) and lift/push the head section to the desired position.
Max. load of the head section is 50 kg.
Do not lift the table on the head section.
