Lojer 1MD1X X-frame Instructions Of Use Download Page 7

7

 

 

Copyright © Lojer Oy, 2013 

02/2013 Rev. 1.0 

 

 

Figure 5: a) foot control b) place free adjustment bar 

 

Figure 4: Central locking pedal 

 

 

 

 

3.2

 

Central locking of the castors (optional) 

 

Always  remember  to  unplug  the  power  cord  before  moving  the  device.  Make  sure  that  the  cord  is  not  left 
between the structure of the table or under the castors. 

 

Make sure that the castors are locked before starting the treatment. 

 

Do not use the device for moving the patients. 

 

 

SQUEEZING  HAZARD!  Make  sure  that  nothing  gets  between  the  structure  or  under  the  device  during 
lifting/lowering. 

Castors with central locking are available as an option for Delta treatment tables. In order to free the locking, press the pedal on 
either side of the table down (Figure 4). To set ready for use, release the pedal. 

 

 

 

 

 
 

 

3.3

 

Height adjustment 

The height of the table can be adjusted with pneumatic foot  control (Figure  5a)). Height  can be adjusted also with place free 
height adjustment bar (accessory) (Figure 5b)). 

 

Make sure that under no circumstances the patient is not able to touch the foot control or the place free bar. 
Use the safety switch when necessary. 

a) 

 

 

b) 

 

 

 

 

 

 

 

SQUEEZING  HAZARD!  Make  sure  that  nothing  is  between  the  structure  or  under  the  device  during 
lifting/lowering. 

Height adjustment is possible from all sides of the table with the place free height adjustment bar. The table top rises when you 
press the bar and lowers when the bar is lifted. 

 

SQUEEZING HAZARD! Make sure that under no circumstances the patient is not able to touch the foot control or 
the place free bar. Use the safety switch when necessary. 

 

 

WARNING! Children or people with no experience of the device must not use the device. For safety reasons use 
the safety switch or unplug the power cord when the device is left without supervision. 

Summary of Contents for 1MD1X X-frame

















Reviews: