Chapter
4
MMI
Menu
14
2.
Press
the
Select
soft
key.
AP Settings
Use
the
AP
Settings
menu
to
set
the
default
access
point,
configure
phone
IP
and
security
settings.
To
configure
the
AP
settings,
perform
the
following
steps:
1.
Select
the
available
network.
2.
Press
the
Default
soft
key
to
set
selected
AP
as
default.
3.
Press
the
Options
soft
key
to
modify
selected
AP
settings.
IP Settings
: Select DHCP or configure Static settings including IP Address, Subnet Mask, Gateway
Address, and DNS Address.
Security Settings
: Enter the Security protocol. The key options are WPA Passphrase, WPA Key,
WEP64 Key, WEP64 Passphrase, WEPl28 Key, and WEP128 Passphrase
Delete
: Delete the selected AP.
Power Save
Use
the
Power
Save
menu
to
activate
the
power
save
mode
of
your
WiFi
phone.
To
configure
power
save
mode,
perform
the
following
steps:
1.
Select
option:
Power Save Off
: (Default) Disable power save mode.
Power Save On
: Enable power save mode.
2.
Press
the
Select
soft
key.
3.
The
phone
will
display
a
warning
message,
press
the
Yes
soft
key
to
continue
or
the
No
soft
key
to
cancel.
4.
When
power
save
mode
is
modified,
the
phone
needs
to
be
rebooted
to
apply
changes.
Press
the
Ok
soft
key
to
reboot
your
WiFi
phone.
Master Reset
Use
the
Master
Reset
menu
to
restore
the
phone
settings
to
its
factory
defaults.
1.
When
Master
Reset
option
is
selected,
a
warning
message
appears
to
prevent
accidental
deletion
of
your
settings.
2.
Press
the
Yes
soft
key
to
continue
reset
or
the
No
soft
key
to
cancel.
Firmware Upgrade
Your
WiFi
phone
supports
firmware
upgrades
as
they
become
available
from
the
vendor.
To
upgrade
your
firmware,
perform
the
following
steps:
1.
Using
a
USB
to
mini
‐
USB
cable,
connect
the
WiFi
phone
to
a
computer
with
a
saved
firmware
file
or
Internet
access.
2.
Select
Firmware
Upgrade
from
the
menu
to
launch
the
firmware
upgrade
screen.
3.
The
following
message
is
displayed:
Phone
must
be
connected
to
computer.
Phone
will
now
power
‐
down.
4.
Press
the
Continue
soft
key
to
continue.
5.
The
computer
detects
the
USB
device
and
activates
the
Hardware
Update
Wizard
.
