7
LM410
LOG HOUSE MOULDER
TECHNICAL DATA
The LM410 fits directly on band sawmills with a rail frame width from 825 to 960 mm. It can be installed on
both narrow, flat and angled rail types. The flexible wheel suspension can be guided from the inner or the
outer side, or from both sides of the rails. If the rail frame width does not correspond, customized adaptor
plates can be made to order. The same applies if the two rails are of different heights.
Dimensions and weight
Length: 720 mm
Height: 1000 mm
Width: 1400 mm
Weight: approx. 200 kg
Timber dimensions
Max. width: 600 mm
Height from rails: 600 mm
Cutter
Diameter: 72 mm
Width: 410 mm
Rotational speed: approx. 6000 rpm
Max. take-off when planing: 7 mm
Max. profile depth: 25 mm
Lateral adjustment: 200 mm
Planing knives are included as standard. Same cutter type as for the PH260.
Motor options
400V 3-phase. Power: 4 kW.
220V 3-phase. Power: 4 kW (for Norway).
270cc petrol engine.
Recommended accessories
Chip chute 100 mm
Chip hose
Hundreds of different standard moulding knives (see our tool catalogue), including up to 200 mm wide
traditional Scandinavian log house timber profile. Custom-made moulding knives can be ordered.
