18
When the rails are adjusted and the wheel
suspension is fitted, the log house moulde can be
lifted onto the rails. Install the anti-tip gaurds. See
page 14.
The log house moulder should be lifted by a truck,
a tractor or the like. Lifting straps can be passed
under the horizontal top chassis of the machine
(A6) but the safest method is to use hoisting rings
(not included) that you bolt to the top side of the
machine. The machine weighs approx. 200 kg
(441 lbs).
Chrushing and tipping risk!
Make sure the end stops on the rails are correctly
fitted.
A light wind can be enough to move the moulder
on the rails. Secure the log moulder, with a strap
e.g., when the machine is not being used.
Ensure that the machine cannot accidantally tip
off the rails. Consult Logosol if the anti-tip guards
do not fit on your sawmill model.
Make sure that all wheels and wheel bearings in
the wheel suspension are correctly fitted on the rails
and that all bolts are firmly tightened.
Suspend the power cable from the ceiling or
protect it in some other way. Never tread on the
cable. The machine should be connected via a
residual circuit breaker.
Ensure the lighting is first-class.
INSTALLING THE LOG MOULDER ON THE RAILS
