background image

Race Timer 

 

Page 16  

 

9.

 

Setup Options 

The Race Timer software has a number of setup options that are available by pressing the “Setup” 
button at the bottom left of the main screen. 

 

 

Titles: the top two titles for the centre of the main screen. 

 

Images: The images in the top left and right corners of the main screen. 

 

Names: List of names, one per line, with optional header (check “Has Header Row option), 
can be specified in a text file. These names are then available as “Racer Name 1 & 2” from a 
drop down list in the main screen. Manual name entry can also be selected if required 
(check “Allow Name Entry” option). 

 

Music played on the computer can be toggled on and off while racing if selected. 

 

Mode: select the configuration for the race timer system: 

o

 

Start Type: (1) Infrared sensors at the start of the track or (2) Starting module with 
solenoids. 

o

 

Start Points: Specify the number starting trigger start points (sensors): one or two 
lanes. For one lane the lane 1 input is used to trigger the start for both lanes. 

o

 

Start Trigger (Solenoid option only): (1) manual starting by press button switches, (2) 
automatic starting by the controller after countdown. 

Summary of Contents for RT1-UML


















Reviews: