Race Timer
Page 17
o
Start Place (Solenoid option only): (1) Select Front when the front of the cars are
aligned at the start position, or, (2) Rear if the rear of the cars are aligned at the start
position.
o
Lanes: Specify if only one or both lanes are in use.
Sensor Distance: this can be modified with the given slider if required, adjusting the sensor
sensitivity.
Track Length: set feet or metre units is required, along with the actual race track length, in
order to display the vehicle speed in MPH or KM/H.
Notes:
1.
With the solenoid starting option selected then automatic operation can be enabled. The
race will automatically start when starting lights turn green and the trigger switches will be
ignored (i.e. manual mode). In this case the left lights at the top of the lane stack remain
green; otherwise the lights are amber and go green when the associated switch is pressed.
© Logos Technology 2011 – 2014
Site:
http://www.logostechnology.com/RaceTimer
Email:
Summary of Contents for RT1-UML
Page 4: ...Race Timer Page 4 One year warranty after purchase...
Page 7: ...Race Timer Page 7...
Page 15: ...Race Timer Page 15...