LOGOMAT DS03, User Manual, Page: 32 / 45

U
SER
M
ANUAL
DS03
R
EV
. 1.0
This document is a property of LOGOMAT s.r.l.
No part of this document may be reproduced without the prior explicit permission of LOGOMAT s.r.l. Page. 32 of 45
2.2.4 Configuration
To access this page, select command < Configuration > from the PROGRAMMING menu.
This menu is used for displaying the location and type of the connected reading head.
Return to previous menu.
2.2.5 Shift Register
To access this page, select command < Shift Register > from the PROGRAMMING menu.
This menu is used to program the shift steps.
The OK signal is shifted by means of the machine clock of a step number which corresponds to the set value. If 0 is
set, the output is immediately updated, therefore the shift is disabled.
To select the item.
To confirm the selection made and to enable the
relevant menu.
Return to previous menu.
C1 → DS2200
C2
→ Unwired
C3
→ Unwired
C4
→ Unwired
Shift 1 = 0
Shift 2 = 0
Shift 3 = 0
Shift 4 = 0