U
SER
M
ANUAL
DS03
R
EV
.
1.0
This document is a property of LOGOMAT s.r.l.
No part of this document may be reproduced without the prior explicit permission of LOGOMAT s.r.l.
Page. 17 of 45
2.1.1.3
Outputs setting
To access this page, select command <Outputs setting > from the SETUP 1 menu.
This menu is used to set the time of the head reading OK signal.
If the reading time is set to 0 msec, the head reading OK signal lasts till the reading phase of the next head.
The OK signal time can be set from 0 to 524 mSec.
To set the OK signal time of the head reading.
To set the OK signal time of the head reading.
To confirm the selection made.
Return to previous menu.
OUTPUTS SETTING 1
00 mSec
Shift=-
Write = confirm
Summary of Contents for DS03
Page 1: ...Rev 1 00 USER MANUAL...