P a g e
|
35
Logmar Camera Solutions IVS
17.
Gently pull the film downwards
(towards the left on the photo below)
until the registration pin
falls into a perforation hole and you cannot drag it further.
You will clearly notice how it goes in and the distance shown on the previous page is now much
smaller.
You will also notice that the gate is completely flat against the pressure plate.
If the loading is wrong
, you will find that the registration pin is completely flat against the pressure plate
and/or openings can be observed between the gate and the pressure plate. If this happens, you will
need to push the film further down into the gate and try loading it again.