19
Regular inspection and the replacement of worn or defective parts in good time will
prolong the life of the stacker. “Prevention is better than repair”, therefore ensure:
• That the battery is fully charged every time
• Correct usage
• Regular cleaning
• Periodic safety and service inspection
For safety reasons please check the below every 3 month:
• Tighten loose screw and nuts
• Check that there are no cracks, fractures and deformations in the bearing
construction
• Wearing parts, such as brakes, wheels and bearings, are adjusted and
exchanged continuously
6.1 Lubrication and hydraulic oil
Under normal operation conditions the stacker requires no lubrication.
All ball bearings are sealed and lubricated for life, and moving parts
have self-lubricating bearings or are treated with grease. The hydraulic
system is filled with hydraulic oil of viscosity class ISO VG 15.
An additive is added to the oil. The concentrate reduces friction and
wear and protects against corrosion.
Pre-mixed hydraulic oil with additive is available from the dealer. The oil is suitable
for use in the temperature range -10 to +50° C. A thinner oil is recommended for
temperatures lower than -10° C (if necessary, contact your dealer).
6.0 Long live the Logiflex
Summary of Contents for LOGIFLEX SELF1003
Page 1: ...LOGIFLEX SELF1003 SELFS1003...
Page 9: ...9 3 0 How to operate the Logiflex...
Page 29: ...29 7 0 Fault codes Fault location key...
Page 31: ...31...
