16
4.3 Transport with load
The load centre is never allowed to exceed the center line of the wheels.
The driving speed is reduced when lifting the forks above 400 mm.
The Logiflex is designed for use on even and level floor. During transport the forks
shall be raised as little as possible. Transport with raised forks should be made
over the shortest possible distances and at low speed.
4.4 Avoid overloads
The maximum load must not be exceeded.
•
Remember
, the stacker is designed for evenly distributed load;
- goods on pallets etc.
• If the forks are point-loaded on one side, there is a risk of bending.
4.0 Optimum safety
Summary of Contents for LOGIFLEX SELF1003
Page 1: ...LOGIFLEX SELF1003 SELFS1003...
Page 9: ...9 3 0 How to operate the Logiflex...
Page 29: ...29 7 0 Fault codes Fault location key...
Page 31: ...31...