background image

 

Installing/Uninstalling Logitech desktop for Bluetooth on my computer 

 

I want to uninstall or replace a Logitech 
device. What should I do ? 

To uninstall a Logitech device follow these steps: 

1

 

Check that the device is connected. If you have a keyboard or MediaPad, 
simply press any key. If you have a mouse, just move it.  

2

 

Press the Connect button located on the bottom of the device.  

 The 

Logitech Connection Wizard

 starts. This wizard guides you through 

the procedure for uninstalling the device.  

3

 

Follow the instructions provided by the wizard.  

 

The procedure you follow is usually similar to the installation procedure. 
Depending on the type of device you are uninstalling, you may be prompted 
enter a PIN code. The final stage of the procedure always involves clicking 
the 

Disconnect

 button on the screen. When you click this button, the device 

is disconnected and uninstalled. 

If you want to replace a Logitech device, for example to use a different Bluetooth

 

mouse or keyboard supplied by Logitech, follow these steps: 

1

 

Uninstall the device or devices to be replaced by following the procedure 
above. 

2

 

Shut down your computer, plug in the new device or devices and then start 
your computer again.  

3

 

Before you log in, press the Connect button on the new device and shortly 
afterwards press the Connect button on the Bluetooth Wireless hub. Repeat 
this procedure for each new device you want to replace. 

4

 

Log in to Windows

. The 

Logitech Connection Wizard

 starts and guides 

you through the procedure for installing the new devices.  

5

 

Follow the instructions provided by the wizard to complete the procedure.  

 

If you do not uninstall an old device before connecting a new one, the new device 
may not be detected and the Logitech Connection Wizard may not start. See 

I want 

to reinstall a Logitech device but the Logitech Connection Wizard does not start

page 

18

, for further details.  

 

© 2003 Logitech, Inc. 

15

 

Summary of Contents for Bluetooth



















Reviews: