Installation Guide
Important Information
Please provide this manual to the owner of the equipment for future use.
Follow the security instructions below and use the device only according to
these to avoid any injuries, fatal accidents or material damage!
•
Recommended for indoor use. For outdoor use install the camera in a
waterproof enclosure with built-in cooler and heater!
•
A person with the appropriate qualification is required to install the
device.
•
The installation must conform with the local codes.
•
Source with output rated 10-24V DC or LPoE.
•
Read the security and user instructions before installation!
•
Use devices and additional components recommended only by the
manufacturer!
•
A wet wipe is sufficient to clean the device. Do not use any liquid or
spray cleaner!
•
Do not touch the image sensor inside the camera!
•
If you notice the followings, testing of the device is recommended in the
service:
– Damaged connectors, cables
– Notice liquid or foreign object in the device
– The device has fallen down, got major impact or the case has damaged
– The device is not working perfectly
– The performance of the device is decreased significantly
•
Do not use the device close to water!
•
Do not use the device in corrosive humid, acidic or alkaline
environments!
•
Do not disassemble and modify the device!
•
Make sure the device is installed at a well-ventilated place! Do not install
it in insulating material or constantly hot place! (rockwool insulation)
3/18
